Models, upgrades, service
Air Buddy Upgrade & Service
We are happy to announce
that the new Air Buddy Nitrox model is now ready.

To celebrate, we are offering a special (limited time) deal for  all Air Buddy owners.
It does not matter where or when you purchased your Air Buddy.
We stand behind each one.

We will do a complete safety check and repair or replace anything needed for  only $15.00
plus $8 s/h. That will include parts, labor, postage and insurance. Your Air Buddy needs
servicing at least every 2 years.

In addition, we will upgrade your present Air Buddy to any model
you prefer. No matter what model you send us, tell us what model
you would like to have and we will do the conversion for FREE!

There are now TWO models of the Air Buddy
Note: The AB-2000   identified by a GOLD nylon ring has been phased out to be replaced by the AB-NX

1. AB-911    identified by the absence of any  nylon ring
This is the original model and will supply enough air  to return to the surface from a maximum depth of 130 feet
with no additional stress invloved.  It is intended strictly for beginning divers who will not be encumbered by extra
equipment or in an area involving currents.

And now:
2. AB-NX   identified by a GREEN nylon ring
This is the NITROX friendly, high performance model that will supply enough air to a maximum depth of 300 feet. It will also supply enough air to fill lift bags, blow whistles, and use as a utility air source. It will provide enough air to allow a diver to lift another diver or a big bag of lobsters or a heavy camera back to the surface.

The one shown in the picture below is shown mounted on a standard octopus hose.

Attention dealers, we can upgrade any of the older models you have in stock
to make them into the new AB-NX. Turn around time is generally within three days.
th of the models are available in three versions.
1. Octopus
This comes on a standard octopus hose and connects to a low pressure port on  your regulator 1st stage.
2. BCD
This comes on a quick connect mounting that snaps between the low pressure filler hose and the power inflator module on your BCD. It eliminates the need for an octopus hose.  
3. Pony
This comes with the mounting swivels and safety valve allowing you to mount it directly on a regulator 1st stage with no hose to make a very convenient pony bottle rig.